Abstract: This workshop addresses sustainable building practices and focuses on the LEED suite of rating systems for green buildings, with particular reference to Kuwait. The systems recognize projects that implement strategies for improving building performance, including energy and water efficiency, outdoor environmental impact, and indoor environmental quality. Presenters:
Abstract: The revised code of practice (MEW/R-6) for the energy conservation program in air-conditioned buildings in Kuwait was prepared by the Kuwait Institute for Scientific Research for the Ministry of Electricity and Water. The code was revised using multilevel analytical, experimental and field-oriented research and a development approach that included engineering-economic analysis on passive energy conservation measures to set cooling energy requirements for buildings, establishment of power ratings for A/C systems and their major components using cost-effective energy conservation measures and techniques, and assessment of operational strategies for A/C systems for power and energy savings. This workshop will also present the experiences of energy auditing in air-conditioning buildings in Kuwait which resulted in energy savings ranged between 10-35%. Presenters:
Abstract: Applying the Continuous Commissioning® (CC®) process typically reduces energy cost by about 20% in existing buildings as measured by the method outlined in the US DOE’s International Performance Measurement and Verification Protocol. This one-day Continuous Commissioning® Workshop presents techniques practiced daily by the engineers at the Energy Systems Laboratory. These techniques are proven to save significant dollars from the Continuous Commissioning® existing buildings at Texas A&M University, airports, school districts, hospitals and many commercial and government facilities. Topics covered in this workshop include an introduction to the CC® process, the fundamentals for CC®; tools and equipment; ensuring optimum building performance; typical CC® measures; financing options; and measurement and verification for CC®. Presenters:
Abstract: Intelligent control systems are vital to any sustainable facility project. Intelligent networked control systems enable devices to share information with each other, with a host monitoring system, and with other higher level enterprise applications. Today’s control strategies are primarily based on open standards such as ISO/IEC 14908 for open building controls. This workshop will discuss the core elements of an open control system, how to ensure the system design remains flexible and sustainable throughout the life cycle of the facility, and will discuss basic system design and architecture. Several actual case studies will be presented where significant energy savings, cost savings, and operational efficiencies were achieved. In some cases energy savings over 30% or more were realized simply by upgrading to an intelligent control environment and providing the facility manager and operations staff better access and visibility to their systems. Key elements of the control system will be presented along with a discussion on selecting certified products, engineers, and system integrators. The workshop will conclude with a discussion on developing an open specification and scope to ensure future verification of the facility. Time will be available to discuss specific implementation issues and projects. Presenters:
